The Ultimate Guide to Creating Your Own Fishing Crate

Are you looking for a cost-effective and convenient way to organize your fishing gear while out on the water? Building your own fishing crate is the perfect solution. In this guide, we will show you how to create the ultimate fishing box using just a few tools and supplies. Whether you fish from the bank, a kayak, or a boat, this crate will simplify your storage options and keep your essentials within easy reach.

What You’ll Need

To get started, gather the following items:

  • 2 Milk Crates (If you don’t already have these, ask a local grocery store to sell you a few)
  • 5 Zip Ties
  • 1 Bungee Cord

You’ll also need the following tools:

  • Hack Saw
  • Diagonal Cutting Pliers (Snips or Wire Cutters)
  • Sand Paper
  • Rasp File (optional)
  • Drill & Bits

Step 1: Building the Foundation

Begin by stacking and centering the two milk crates, ensuring that they are faced in the same direction. Using a hack saw, cut off the top section of the top crate, leaving only the base foundation. This will serve as the lid for your crate.

Milk Crates

Enhancing the Structure

Now, it’s time to refine the edges of the crate. Use a pair of cutting pliers to remove any small webbed connection points. To save time during sanding and filing, cut as close to the base as possible. Afterward, use a rasp file to clean up the areas where you made cuts and smooth out any rough edges.

Further reading:  Scupper Holes: Enhancing Your Kayaking Experience

Tools

Creating the Fishing Crate Hinge

Next, you’ll need a drill and two drill bits. Choose a ¼ inch drill bit and make five holes on the backside of the crate. By drilling the holes while the two crates are stacked, you’ll ensure that they line up perfectly. These holes will be used to attach the zip ties and create the fishing crate hinge.

Drilling Holes

Thread five zip ties through the drilled holes and tighten them enough for a secure open and close motion. Take your time to find the perfect amount of resistance. Once you’re satisfied, snip off the tag end of each zip tie.

Adding the Finishing Touches

Drill a large hole on the front side of your crate, big enough to fit a standard bungee cord. Use a ½ inch drill bit for this task. After making the hole, thread one end of the bungee cord through it. Tie a simple overhand knot to secure it in place. Adjust the knot as needed until you can clip the other end of the bungee cord onto your milk crate securely.

Locking the Milk Crate

Finally, cut off the remaining tag end of the bungee cord and use a lighter to singe the loose ends. Now, your milk crate is securely locked and ready for use.

Customizing Your Fishing Crate

With the foundation built, it’s time to personalize your crate with tackle trays and other fishing accessories. You can fit two large 3700 style trays diagonally, or opt for 4 to 5 smaller trays for easier storage.

For added security, attach bungee cords and clips over the top tray to keep your tackle and gear in place. You can also add clips for pliers, cutting tools, and even rod storage. Get creative and customize your crate to suit your specific needs.

Further reading:  Kayaking in Portland, Maine: A Paradise for Adventure Seekers

Customized Crate

Conclusion

Creating your own fishing crate doesn’t require much time, equipment, or skill, but the end result is a sturdy and functional piece of equipment that will revolutionize your fishing experience. So why wait? Start building your personal fishing crate today and enjoy an organized and hassle-free time on the water. If you’re seeking additional inspiration or have any questions, visit UpStreamPaddle. Happy fishing!